http://www.wphidled.com/Sales Manager : Amy Feng
MSN : Amy@wplamps.com Email : Amy@wplamps.com
Alibaba: cn220020193 Phone: 0086-13126403867
1, in the case their own installation, be sure to check when choosing a good model for their own modification of the corresponding distance light xenon lamp models, because different models of HID for the base will be different.
2, the choice should be to select a color temperature HID Color temperature range 4300K-6000K range, which this color temperature range of midday sun, the white-owned, integrated in the driving rain and fog weather penetration, it is integrated to the best selection of color temperature range .
3, xenon lamp ballast should not be placed on the large amount of heat inside the zone, to ensure that the ballast of the working environment temperature range between -20 ℃ -75 ℃ to play the best performance.
4, HID Ballast better fit as far as possible placed in the position of ventilation, so air can flow through the air also reduces the temperature of the ballast work.
5, the ballast of the line body suitable for wound, to avoid affecting the magnetic field to the other car electronic devices work properly.
6, the ballast water should be avoided and lines around the body, this wet environment will accelerate the aging of the body ballast line to avoid wear and tear caused by short circuit after aging was not working properly.
7, when they start to avoid headlights cause excessive current causing the fuse blows, the fuse should be the original car's headlights should be replaced with more than 20A.
8, installed in the ballast and the bulbs as much as possible between the series of extension cords are not used to avoid the lines caused by changes in partial pressure of resistance to change the original design created by the current phenomenon of lighting does not shine.
Keywords: xenon lamp
