http://www.wphidled.com/Sales Manager : Amy Feng
MSN : Amy@wplamps.com Email : Amy@wplamps.com
Alibaba: cn220020193 Phone: 0086-13126403867
Into the winter, because of the larger changes in temperature, various kinds of vehicles are often symptoms, but some phenomenon is not a malfunction. Recently, many have just bought a car not long the new owner of the total memory in the reflected lights in the fog of this phenomenon, have to drive to their shop for repair 4S brands, most of the existing owners began to question the quality of light, this phenomenon of experts for you analyze the reasons for generating the mist.
From temperature changes cause the fog lights
Equipped with a headlight assembly back cover above the tube, thermal expansion of the gas discharge through this channel, but sometimes there will be some moisture into the ventilation tube, which caused a slight fog phenomenon, this fog due to temperature changes usually occurs in winter, the rainy season, or fog.Now car 's headlights in order to pursue better lighting effects, most of all by lens type, which makes the light more focused lights, and headlight mirror only a very small area is heated, moisture gathered in the main area outside mirror lights , so the owner can easily be found. When the lights get into the mist after the owners do not panic, in general, does not affect the normal use of lights, it is not necessary to the 4S shop for repairs.
Washing or wading from the fog led lights
Headlights into the mist addition assembly temperature within reason, more often it is improper for wading or washing, in cleaning the engine when the wet towel should be used to scrub or clean using compressed air inside the engine compartment, but not Rinse with water cannons directly. Owners who frequently use high-pressure water washing or engine lights, can easily lead to drops of water into the vent, then fog is generated inside the lamp.In addition, vehicles often have wading is easy to make fog lights, some traveling by car enthusiasts like to drive involving deep, usually over the wheel after the water depth, water will be from the ventilation tube into the lights, lights within the water affect not only lighting, but also may damage the headlamps.
Remove the fog lights
When the owners found that there are fog lights, the first analysis of the causes of fog, if it is caused due to temperature or moisture, such as using night lights for too long, the next day that there are fog lights, this time almost as long as the open about 10 minutes of light or high beam, the fog lights will gradually disappear.Typically, the lights in the normal use of water within the lights or the sun will evaporate quickly under the irradiation must not be used to remove baked on the fog lights to avoid damage to the headlight assembly.
After washing or wading for generating the mist of time your lights to make sure to mist evaporates, and can not long ignore the lights in the fog, the owner should develop the habit of checking light usage. If the lights get into too much fog, and often happens, that lights the dust cover may be damaged, causing the water into the lights, this time should be inspected immediately to the 4S shop, in order to avoid corrosion of the water lines and connectors.
